Reserve-based lending is the backbone of upstream oil and gas finance, and it behaves unlike any other corporate credit facility. The amount available is derived from an engineered valuation of the borrower's proved reserves, discounted and risk-adjusted by the lender, and it is recalculated at least twice a year against the lender's own forward price assumptions.
This produces a structural feature that catches operators out repeatedly: the facility can shrink without the company doing anything wrong. A redetermination that lands after a decline in the forward curve can reduce the borrowing base below the drawn balance, creating a deficiency that must be cured — typically within 30 to 90 days, by repayment, by pledging additional reserves, or by posting other collateral. Operators who have treated an undrawn borrowing base as committed liquidity have discovered otherwise at precisely the worst moment in the cycle.
How the Borrowing Base Is Actually Built
Understanding the calculation is what allows an operator to manage it. Lenders generally construct it as follows:
- Start with proved reserves, as set out in a third-party reserve report. Proved developed producing reserves receive the most favourable treatment; proved developed non-producing and proved undeveloped reserves are heavily discounted or, with some lenders, excluded from the calculation entirely.
- Apply the lender's price deck, not the strip and not the operator's assumptions. Bank price decks are typically set conservatively below the forward curve, and the gap between the two is often the single largest driver of a disappointing borrowing base.
- Discount the resulting cash flows, commonly at a rate in the region of nine to ten per cent, and then advance only a percentage of that present value — frequently around 60 to 65 per cent of the proved developed producing component.
- Adjust for concentration and operatorship. Single-field or single-basin concentration, short reserve life, non-operated positions and hedging gaps all reduce the outcome.
Two practical implications follow. First, hedging directly increases the borrowing base, because it removes price risk from the cash flows the lender is valuing; most reserve-based facilities require a minimum hedged percentage of proved developed producing production, and operators who hedge above the minimum frequently obtain a larger base. Second, the quality and independence of the reserve report is a financing variable in its own right — a report from an engineering firm the lending market respects produces a better result than one it does not recognise.
What Reserve-Based Lending Will Not Fund
Proved undeveloped locations receive little or no credit in a borrowing base, which means the drilling programme that converts them into producing reserves generally cannot be funded by the facility that will later value them. This is the central financing gap in upstream development, and it is filled from other sources:
Second lien and mezzanine debt
Sits behind the reserve-based facility, prices considerably higher, and lends against development potential the senior lender ignores. Frequently carries warrants or a production payment component.
Drilling partnerships and non-operated participation
A partner funds a share of well costs in exchange for a working interest, often with a promoted structure in which the operator is carried to a defined point. This transfers capital requirement and risk simultaneously, at the cost of future production.
Volumetric production payments and overriding royalties
Monetise a defined volume or revenue share from specified wells. The capital is non-recourse to the wider company, and because the instrument sits above the working interest it is not debt for most covenant purposes — though it permanently removes a slice of production economics.
Mineral and royalty monetisation
Operators holding mineral or royalty interests can sell or borrow against them separately. Royalty buyers price these assets on a different basis from operating companies, and the proceeds frequently fund development at a lower effective cost than equity.
Private equity and growth capital
For larger programmes, acquisitions or entry into a new basin. The considerations are set out in our guide to when to consider private equity.
The facility values the wells you have drilled. Something else has to pay for the ones you have not.
Acquisition Finance and Portfolio Management
Upstream acquisitions are generally financed against the acquired reserves themselves, which creates a sequencing problem: the borrowing base against the target's reserves is usually not available until closing, while the purchase price is due at closing. The gap is bridged with an acquisition bridge facility, refinanced into an expanded reserve-based facility once the reserve report on the combined assets is complete, with equity or mezzanine covering the portion the base will not support.
On the disposal side, non-core asset sales, non-operated interest divestitures and royalty carve-outs are frequently the cheapest capital available to an operator. They dilute nothing and cost nothing in interest; what they cost is future production, which is why they should be measured against the cost of the alternatives rather than treated as a last resort.
Managing Redetermination Risk
Because the borrowing base is the operator's primary liquidity source and the least stable, managing redetermination risk is a core treasury discipline rather than a financing afterthought:
- Do not run the facility fully drawn. Maintaining headroom above the expected redetermination outcome is the simplest protection against a deficiency.
- Hedge beyond the covenant minimum, which both stabilises cash flow and supports the base itself.
- Model the base at the lender's price deck, not the strip, and stress it at lower cases before each redetermination.
- Keep the reserve report current and ensure successful wells are reflected in the next calculation, since production added between reports earns no credit until it is reported.
- Diversify funding sources so that a reduced base does not halt the development programme. Operators dependent on a single facility have no response to an adverse redetermination.
OAKRG advises oil and gas operators on reserve-based and acquisition facilities, development and mezzanine capital, royalty and mineral monetisation and growth equity through its energy project finance practice, with transactions typically from $5M to $250M+.
Frequently Asked Questions
How is an oil and gas borrowing base calculated?
The lender takes proved reserves from a third-party reserve report, applies its own conservative price deck rather than the forward strip, discounts the resulting cash flows at a rate commonly around nine to ten per cent, and then advances a percentage of that present value — frequently in the region of 60 to 65 per cent of the proved developed producing component. Proved undeveloped reserves receive little or no credit. The outcome is further adjusted for basin and field concentration, reserve life, operatorship and the extent of hedging in place.
How often is a borrowing base redetermined, and what happens if it falls?
Scheduled redeterminations usually occur twice a year, and most facilities also permit interim redeterminations at the lender's or borrower's request. If the recalculated base falls below the drawn balance, a borrowing base deficiency arises and must be cured within a defined period, commonly 30 to 90 days. Cure options typically include repaying the excess, pledging additional reserves or collateral, or agreeing a repayment schedule with the lender. This is why running a reserve-based facility fully drawn is risky: the deficiency can arise purely from a price movement.
Can reserve-based lending fund a drilling programme?
Only indirectly. Because proved undeveloped locations receive little credit in the borrowing base, the facility generally will not fund the drilling that converts them to production, even though it will value the resulting wells afterwards. Development capital typically comes from second lien or mezzanine debt, drilling partnerships in which a partner funds well costs for a working interest, volumetric production payments, royalty monetisation, or equity. Cash flow from existing production funds part of the programme in most cases, with these instruments covering the balance.
Does hedging increase how much an operator can borrow?
Yes, and the effect is significant. Hedging removes price risk from the cash flows the lender is valuing, so a hedged production profile supports a larger borrowing base than an unhedged one. Most reserve-based facilities impose a minimum hedged percentage of proved developed producing volumes as a covenant, and operators who hedge above that minimum frequently negotiate a better base. The constraint is that hedges consume credit capacity with the counterparty and can generate margin requirements, which should be planned for rather than absorbed from the operating facility.